Show simple item record

dc.contributor.authorXiong, Z. X.zh_CN
dc.contributor.authorPan, J.zh_CN
dc.contributor.authorXue, H.zh_CN
dc.contributor.authorMai, M. F.zh_CN
dc.contributor.authorQiu, H.zh_CN
dc.contributor.authorChen, L. F.zh_CN
dc.contributor.authorLeng, Jzh_CN
dc.contributor.authorAsundi, AKzh_CN
dc.contributor.authorEcke, Wzh_CN
dc.contributor.author陈立富zh_CN
dc.date.accessioned2013-12-12T02:03:59Z
dc.date.available2013-12-12T02:03:59Z
dc.date.issued2009zh_CN
dc.identifier.citationSecond International Conference on Smart Materials,7493zh_CN
dc.identifier.issn0277-786Xzh_CN
dc.identifier.otherWOS:000310681100166zh_CN
dc.identifier.urihttps://dspace.xmu.edu.cn/handle/2288/59906
dc.identifier.urihttp://dx.doi.org/10.1117/12.843577zh_CN
dc.description.abstractCeramic of Pb(ZrTi)O-3 is one kind of typical smart materials, with excellent ferroelectric and piezoelectric properties. In this paper, a novel heat treatment was applied for the ceramic fibers prepared via sol-gel route with continuous spinning. Aided with microwave energy, dense ceramic fibers are obtained after treated at around 900 degrees C for 1h, in which the diameters of the fibers are between 5 mu m and 30 mu m. The samples were also characterized with thermal analysis, FTIR spectroscopy and X-ray diffraction. By using of a scanning electron microscope, SEM, it was observed that a dense microstructure of the fiber was reached.zh_CN
dc.language.isoen_USzh_CN
dc.subjectCOMPOSITESzh_CN
dc.titleHeat treatment of piezoelectric Pb(ZrTi)O-3 ceramic fibers prepared with continuous spinningzh_CN
dc.typeArticlezh_CN


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record