Show simple item record

dc.contributor.author王琼zh_CN
dc.contributor.authorAdel Attiazh_CN
dc.contributor.author施志聪zh_CN
dc.contributor.author杨勇zh_CN
dc.contributor.authorWANG Qiongzh_CN
dc.contributor.authorAdel Attiazh_CN
dc.contributor.authorSHI Zhi-congzh_CN
dc.contributor.authorYANG Yongzh_CN
dc.date.accessioned2013-11-18T07:46:38Z
dc.date.available2013-11-18T07:46:38Z
dc.date.issued2008-02-28zh_CN
dc.identifier.citation电化学,2008,14(01):30-33.zh_CN
dc.identifier.issn1006-3471zh_CN
dc.identifier.urihttps://dspace.xmu.edu.cn/handle/2288/58197
dc.description.abstract选用合适模板剂由溶胶凝胶法合成高度有序介孔结构的磷酸钛正极材料.研究煅烧温度对材料孔结构及材料的电化学性能的影响,合成样品的结构形貌和比表面分别用XRD、BET、TEM及元素分析仪表征.充放电测试结果表明,该介孔结构正极材料表现出优越的电化学性能,以150 mA/g充放电,首次放电容量高达94 mAh/g,而不含模板剂无孔结构的材料放电容量仅37 mAh/g.zh_CN
dc.description.abstractOrdered porous titanium phosphate materials were prepared by using the surfactant template combined with the sol-gel method.The samples were characterized by small angle X-ray diffraction(SA-XRD) method,N2 adsorption/desorption techniques,high resolution transmission electron microscopy(HRTEM) and element analysis.It is found that the calcination temperature is a big influence on the porous structure,and electrochemical performance of the titanium phosphate materials.,and the mesoporous titanium phosphate showed good performance in the electrochemical test,the first discharge capacity is 94 mAh/g at the current density of 150 mA/g.On the other hand,the no porous material with a low capacity of 37 mAh/g under the same charge-discharge condition.zh_CN
dc.language.isozhzh_CN
dc.publisher厦门大学《电化学》编辑部zh_CN
dc.relation.ispartofseries研究论文zh_CN
dc.relation.ispartofseriesArticleszh_CN
dc.source.urihttp://electrochem.xmu.edu.cn/CN/abstract/abstract8655.shtmlzh_CN
dc.subject有序介孔zh_CN
dc.subject磷酸钛zh_CN
dc.subject正极材料zh_CN
dc.subject电化学性能zh_CN
dc.subject锂离子电池zh_CN
dc.subjectordered mesoporouszh_CN
dc.subjecttitanium phosphatezh_CN
dc.subjectcathode materialzh_CN
dc.subjectelectrochemical performancezh_CN
dc.subjectlithium ion batteryzh_CN
dc.title有序介孔磷酸钛锂离子电池正极材料制备及电化学性能zh_CN
dc.title.alternativePreparation and Electrochemical Performance of Ordered Mesoporous Titanium Phosphate as Cathode Material for Li-ion Batteryzh_CN
dc.typeArticlezh_CN
dc.description.note作者联系地址:厦门大学化学化工学院固体表面物理化学国家重点实验室,厦门大学化学化工学院固体表面物理化学国家重点实验室,厦门大学化学化工学院固体表面物理化学国家重点实验室,厦门大学化学化工学院固体表面物理化学国家重点实验室 福建厦门361005,福建厦门361005,福建厦门361005,福建厦门361005zh_CN
dc.description.noteAuthor's Address: State Key Laboratory for Physical Chemistry of Solid Surfaces,Institute of Chemistry andChemical Engineering,Xiamen University,Xiamen 361005,Fujian,Chinazh_CN


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record