Using a facing target sputtering equipment, Fe-Ti-N films were deposited on water-cooled and heated substrates under different nitrogen flow ratios, R(N-2). The composition, microstructure, and magnetic properties of the ...

ZrYN coatings with various yttrium contents (0 to 15 at.% in the targets) are deposited from zirconium yttrium composite targets using DC magnetron sputtering. The effect of varying amounts of yttrium addition on the ...

Low-toxicity single crystal SnS nanowires had been successfully synthesized by the catalyst-assistant chemical vapor deposition. Au nanoparticles were applied on the ITO surface as the catalysis, using SnS powder and S ...

The photoluminescence of transpartent and conductive CdIn2O4 thin films formed by rf sputtering has been investigated as a function of oxygen concentration. The photoluminescence peaks show a "red shift" as the oxygen ...

Fe-Co-Cr-N thin films with various thicknesses were deposited by substrate rotation during magnetron co-sputtering. The dependence of structural and soft-magnetic properties on film thickness was investigated. It was found ...

Fe-Co-Cr and Fe-Co-Cr-N thin films were fabricated by magnetron co-sputtering at room temperature, and their structural, electrical and magnetic properties were examined by various analytic techniques. It was observed that ...

The Al-doped zinc oxide (ZnO:Al) films were prepared on quartz glass flakes and silicon wafers by radio frequency (RF) magnetron sputtering which uses an aluminum-doped zinc oxide ceramic target. Meanwhile, their properties ...

SnS thin films were deposited on ITO substrates from SnCl(2) and Na(2)S(2)O(3) aqueous solution by pulse electro-deposition method, and the as-prepared SnS thin films were annealed at different temperatures in air for 1 ...

Using a plasma-gas-condensation cluster deposition apparatus, Fe2Ni78 clusters are deposited on substrates. When a bias voltage, V-A, is applied to a substrate, neutral and charged clusters are formed in a plasma region ...

Size-monodispersed FexPt1-x alloy clusters were synthesized using a plasma-gas-condensation technique which employs two separate elemental sputtering sources and a growth chamber. The composition of the alloy clusters was ...