Show simple item record

dc.contributor.author李全一
dc.contributor.author杨琪
dc.contributor.author赵艳红
dc.contributor.authorLI Quan-yi
dc.contributor.authorYANG Qi
dc.contributor.authorZHAO Yan-hong
dc.date.accessioned2018-05-10T08:33:23Z
dc.date.available2018-05-10T08:33:23Z
dc.date.issued2018-04-28
dc.identifier.citation电化学,2018,24(02):160-165.
dc.identifier.issn1006-3471
dc.identifier.urihttp://dx.doi.org/10.13208/j.electrochem.170409
dc.identifier.urihttps://dspace.xmu.edu.cn/handle/2288/161087
dc.description.abstract应用简单的刮涂法以及真空煅烧可制备出承载在铜箔表面的二氧化钼-碳(MoO2-C)复合涂层,并对样品的形貌、成分、结构和电化学性能进行分析.结果表明,该复合涂层由单斜结构的MoO2纳米粒子和无定形碳组成.一些MoO2纳米粒子承载在碳基体表面,其尺寸为5~30nm;一些MoO2纳米粒子包覆在碳基体内部,其尺寸约为5nm. MoO2-C复合涂层为多孔结构,其孔隙尺寸为1~3nm.该复合涂层与铜箔结合紧密,界面处没有裂纹.承载在铜箔表面的MoO2-C复合涂层的比容量高、循环和倍率性能良好.在100mA·g-1电流密度下,该负极经过100次循环后的比容量为814mAh·g-1,在循环过程中没有出现明显的容量衰减,即使在5000mA·g-1的高电流密度下,其比容量仍有188mAh·g-1.
dc.description.abstractThe molybdenum dioxide-carbon(MoO2-C)composite coatings on the surface of Cu foils were prepared by simple knife coating route and followed by sintering in vacuum. The morphology, composition, structure and electrochemical performance of the MoO2-C composite coatings were investigated. The results demonstrated that the MoO2-C composite coatings consist of MoO2 nano-particles with monoclinic crystal structure and amorphous carbon. Some MoO2 nano-particles with a size range of 5-30nm were loaded on the surface of carbon matrices; while some MoO2 nano-particles with a size of ~5nm were encapsulated inside. The composite coatings showed porous structure with the pore size ranging 1~3nm. The composite coatings attached firmly on the surface of Cu foils without any cracks accurred at their interface. The Cu-supported MoO2-C composite coatings delivered high capacity and good cyclic performance with a capacity of 814 mAh·g-1 at a current density of 100mA·g-1 after 100 cycles without apparent capacity fading during cycling, and good rate performance with a capacity of 188mAh·g-1 even at a high current density of 5000mA·g-1.
dc.description.sponsorship上海市教委高峰学科(高能束智能加工和绿色制造)和上海工程技术大学研究生创新项目(No.16KY0512)资助
dc.language.isozh
dc.publisher厦门大学《电化学》编辑部
dc.relation.ispartofseries研究论文
dc.relation.ispartofseriesArticles
dc.source.urihttp://electrochem.xmu.edu.cn/CN/abstract/abstract10398.shtml
dc.subject二氧化钼
dc.subject碳基复合材料
dc.subject涂层
dc.subject负极材料
dc.subject电化学性能
dc.subjectmolybdenum dioxide
dc.subjectcarbon based composite
dc.subjectcoating
dc.subjectanode materials
dc.subjectelectrochemical performance
dc.title二氧化钼-碳复合涂层的电化学性能研究
dc.title.alternativeElectrochemical Performance of MoO2-C Composite Coatings
dc.typeArticle
dc.description.note作者联系地址:上海工程技术大学材料工程学院,上海201620
dc.description.noteAuthor's Address: School of Materials Engineering, Shanghai University of Engineering Science, Shanghai 201620
dc.description.note通讯作者E-mail:qiyang@163.com


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record